Phono stage connector, Power – Krell Phantom Manual User Manual
Page 26
Advertising
26
Phono Stage Connector
29 Phono Power Port
This port is used for connecting the preamplifier to a Krell KPE phono stage.
Power
25 DC Power Connector
This is used to connect the preamplifier chassis and the power supply chassis,
using the provided 12-pin DC power cable.
27 Analog and Digital Power Supply Fuses
Always unplug the power cord before inspecting these fuses. Always replace
the fuses with the exact style and rating.
28 IEC Power Cord Receptacle
The IEC power connector, located on the power supply chassis, is for use with
the provided IEC standard 15 amp AC power cord. The switch should remain
unobstructed for ease of operation and in case of an emergency.
Advertising