Five, Connecting the phantom to your system, Input and output connections – Krell Phantom Manual User Manual
Page 27
27
SECTION
FIVE
Connecting the Phantom
to Your System
This section describes Phantom Preamplifier connections.
Input and Output Connections
Krell recommends using its proprietary Krell CAST system for unparalleled sonic
performance for connections between the Phantom preamplifier and other CAST-
equipped components. Krell CAST uses flexible interconnecting cables that can
be drawn through tight spaces and concealed.
The Phantom also offers balanced operation. The circuitry and connections asso-
ciated with balanced operation not only can minimize sonic loss but also are
immune to induced noise, especially for installations using long cables.
XLR Pin Configuration
Pin 1
Ground
Pin 2
Non-inverting (0
O
)
Pin 3
Inverting (180
O
)
Inputs and outputs are located on the Phantom back panels. Maintain the correct
left/right orientation, when hooking up your system.