Krell Phantom Manual User Manual
Page 46
46
(SECTION SEVEN: Customizing the Phantom continued)
Stereo/Mono
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
STEREO/MONO.
2.
Press the enter button or key (6) on the remote control
.
The front panel display
(3) shows the default mode:
STEREO
.
3.
Use the level control knob or the up and down keys to select the desired
option:
STEREO
or
MONO L+R
.
4.
Press the enter button or key to conirm the selection. The front panel dislay
reads:
STEREO/MONO.
STEREO
The left and right subwoofer connections output independent left and right sig-
nals. For use with subwoofers that have stereo inputs or individual left and right
subwoofers.
MONO L+R
The left and right subwoofer connections output combined left + right signals.
For use with subwoofers tha have a monaural input.
Phase
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
SUBWOOFER PHASE.
2.
Press the enter button or key (6) on the remote control
.
The front panel display
(3) shows the default mode:
NORMAL
.
3.
Use the level control knob or the up and down keys to select the desired
phase:
NORMAL
or
INVERTED
.
4.
Press the enter button or key to conirm the selection. The front panel dislay
reads:
SUBWOOFER PHASE.
NORMAL
The subwoofer outputs are in phase relative to the main outputs.
INVERTED
The subwoofer outputs are 180° out of phase relative to the main outputs.
continued