Krell Phantom Manual User Manual
Page 48
48
(SECTION SEVEN: Customizing the Phantom continued)
Tape
This function enables you to configure the tape input as a standard input labeled
S-4. The options are:
TAPE, S-4
.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
TAPE.
2.
Press the enter button on the preamplifier front panel or the enter key (6) on the
remote control
.
The front panel display (3) shows the default mode:
TAPE
.
3.
Use the level control knob or the up and down keys to select the desired
option:
Tape
or
S-4
.
4.
Press the enter button or key to conirm the selection. The front panel display
reads:
TAPE
.
TAPE
The Tape setting maintains standard tape loop functionality with the tape outut.
S-4
Input behaves as an additional single-ended input. Incoming signal sent to tape
output.