Menu functions – Krell Phantom Manual User Manual
Page 32
32
Menu Functions
AC Mains
This function enables you to operate the Phantom from a switched AC outlet. If
AC Mains is set to
ON,
the preamplifier turns on immediately, by-passing stand-by.
Thereafter, you may switch the preamplifier to and from stand-by, using the power
button or pwr key (1). The options are:
OFF, ON.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
AC MAINS.
2.
Press the enter button on the preamplifier front panel or the enter key (6) on the
remote control
.
The front panel display (3) shows the default mode:
OFF
.
3.
Use the level control knob or the up and down keys to select the desired
option:
OFF
or
ON.
4.
Press the enter button or key to confirm the selection. The front panel display
reads:
AC MAINS.
OFF
The Phantom switches to stand-by mode, when it detects AC power.
ON
The Phantom turns on immediately, bypassing the stand-by mode, when it
detects AC power.
(SECTION SEVEN: Customizing the Phantom continued)