Krell Phantom Manual - Manual (Page 37)

37
Input Phase
This function enables you to invert the absolute polarity of the selected input 180
degrees. The selections are: NORMAL, INVERT.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or the up and down
keys (14) on the remote control to select: INPUT PHASE.
2. Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control . The front panel display (3) shows the default mode: B-1 .
3. Use the level control knob or the up and down keys to select the desired input
from the list: B-1, B-2, S-1, S-2, S-3, C-1, C-2, or TAPE.
4. Press the enter button or key. The front panel display shows the default mode:
NORMAL .
5. Use the level control knob or the up and down keys to select: NORMAL or INVERT.
6. Press the enter button or key to confirm the selection. The front panel display
shows the selected input.
NORMAL
The phase of the selected input is unaffected.
INVERT
The phase of the selected input is inverted 180 degrees.
Input Trigger
This function enables you to configure the input trigger. The options are: OFF,
NORMAL, THEATER.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or the up and down
keys on the remote control to select: INPUT TRIGGER.
2. Press the enter button on the preamplifier front panel or the or enter key (6) on
the remote control . The front panel display (3) shows the default mode: NORMAL .
3. Use the level control knob or the up and down keys to select the desired
option: OFF, NORMAL, or THEATER.
4. Press the enter button or key to confirm the selection. The front panel display
reads: INPUT TRIGGER.
5 Menu Button or Key
Enter or exit the menu.
14 Volume Knob
or Level Keys
Navigate the menu hierarchy;
review functions and configu-
ration options.
6 Enter Button or Key
Select a configuration option;
confirm a selection.
BACK
Scroll backwards through the
menu hierarchy; exit a menu
option without confirming it.
continued