Revel Salon - Manual (Page 18)

CABINET CARE
Each REVEL ULTIMA STUDIO loudspeaker cabinet has a paint
finish and does not require any routine maintenance. Use a soft
cloth, dampened with water only, to remove any fingerprints or to
wipe off dust. Clean the grille by gentle vacuuming.
For wood side panels, occasionally use a household furniture polish
to maintain the beauty of the hardwood veneers.
For aluminum side panels, use a soft cloth, dampened with soapy
water only. Wipe in the direction of the grain only.
LOUDSPEAKERS AND POWER
REVEL ULTIMA STUDIO loudspeakers use high-order crossovers
with steep cut-offs to eliminate damage caused by “out of band”
frequencies. Using this approach, in combination with carefully
selected components and transducers, gives us confidence that a
REVEL ULTIMA STUDIO loudspeaker will not fail, even under
extreme conditions. However, there is a limit to how loud any
speaker can play continuously. A good rule of thumb is to avoid
playing the system at volume levels beyond where the sound is
“clear.” If the sound becomes distorted or strained, reduce the
volume level immediately to avoid damage.
If you are unsure of the suitability of current or planned amplifier
components, please ask your Revel dealer to review them before
connecting your REVEL ULTIMA STUDIO loudspeakers.
REVEL ULTIMA STUDIO
Owner’s Manual
18