Panel replacement (cont’d) – Revel Salon User Manual
Page 20
Figure 15. Installing the
REVEL ULTIMA STUDIO
loudspeaker grille.
Figure 16. Installing the other
REVEL ULTIMA STUDIO
side panel.
PANEL REPLACEMENT (CONT’D)
6. Install another new side panel, as shown in Figure 16. Carefully
align panel cups onto grille tips. Then start all six bolts (with
trim rings) by hand and tighten them with the hex wrench. Be
careful not to overtighten.
7. Stand the reassembled REVEL ULTIMA STUDIO upright.
Repeat steps 1 through 6 to install new side panels on the other
REVEL ULTIMA STUDIO.
REVEL ULTIMA STUDIO
Owner’s Manual
20
,,,
,,,,,,,,
,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,,
,,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,
,,,,
,,,
,,,,,,,,
,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,,
,,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,
,,,,
Bolt
Trim
Ring