Revel Salon - Manual (Page 22)

Figure 17. Overall dimensions
for the REVEL ULTIMA
STUDIO loudspeaker.
SPECIFICATIONS (CONTINUED)
Frequency Responses: Listening Window Response;
(continued) + 1.5 dB from 31 Hz to 20 kHz
This improved “on-axis” measurement reduces the visual confusion
of inaudible local interference, yet still retains full accuracy without
using “spectral smoothing” which results in significant data loss.
Low Frequency Extension;
-10 dB @ 22 Hz, -6 dB @ 26 Hz, and
-3 dB @ 33 Hz
Studies have shown that the -10 dB low frequency extension speci-
fication is the one that best correlates to controlled listening tests.
At low frequencies, most loudspeaker/room combinations will
exhibit significant “room gain”, which is an increasing rise in level
as frequencies decrease. In addition, the -10 dB specification reflects
the steepness (i.e., order) of the low-frequency roll-off, which is not
significantly indicated in -3 dB specifications.
Dimensions: 43 7 ⁄
8
"H x 12 3 ⁄
4
"W x 19 3 ⁄
8
" D
1,114 mm H x 324 mm W x 492 mm D
(include grilles; add 1
1 ⁄ 2 " or 38 mm for spikes;
also refer to Figure 17 below)
Weight: 164 lb (74.4 kg) each carton
Revel constantly strives to update and improve existing products, as well as create new ones. Therefore the specifi-
cations and construction details in this and related Revel publications are subject to change without notice. Revel is
a registered trademark of Revel, Inc.
REVEL ULTIMA STUDIO
Owner’s Manual
22
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
19 3/8"
(492 mm)
43 7/8"
(1,114 mm)
1 1/2"
(38.1 mm)
12 3/4"
(324 mm)