Icnc xt – Tweco iCNC XT User Manual
Page 84
Advertising
iCNC XT
5-26
OPERATION
Manual 0-5299
5.7.14 Aux1 Switch
• ON position will activate the aux1 signal.
• AUTO position will allow the cutting program to command the aux1 signal.
• OFF position will prevent activating the aux1 from a cutting program.
5.7.15 Aux2 Switch
• ON position will activate the aux2 signal.
• AUTO position will allow the cutting program to command the aux2 signal.
• OFF position will prevent activating the aux2 from a cutting program.
Advertising