LaMotte TC-3000 Tri-Meter - Manual (Page 39)

LIQUID DPD REAGENTS
(Liquid calibration should be selected in the Options menu)
The letter (L) in the upper right corner of the display indicates that the meter is in liquid
mode.
Free Chlorine, Combined And Total Chlorine
1. Press
ON to turn the meter on.
1 . 3
2. Press
*IOK to select Measure.
M a i n M e n u
* M e a s u r e
D a t a L o g g i n g
O p t i o n s
1 6 : 0 2 : 1 9 0 1 / 0 4 / 0 5
3. Scroll down and then press
*IOK
to select Chlorine.
M e a s u r e
T u r b i d i t y
C o l o r
* C h l o r i n e
1 6 : 0 2 : 1 9 0 1 / 0 4 / 0 5
4. Press
*IOK to select Test Free
Chlorine.
C h l o r i n e ( L )
* T e s t F r e e
T e s t T o t a l
1 6 : 0 2 : 1 9 0 1 / 0 4 / 0 5
5. Rinse a clean tube (0290) with the
sample water. Fill the tube to the
10 mL line with the sample water.
Dry the tube with a lint-free cloth.
Put on a dry positioning ring. Cap
the tube.
ANALYSIS & CALIBRATION • CHLORINE 39