Audio port, Eim2rca adapter, Audio port -12 eim2rca adapter -12 – ClearOne DigiLinX User Manual
Page 25
DigiLinX Installation and Design Guide
2-12
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 2-16
AMP2200
Audio Port
The Audio Port makes it easy to connect a local audio device. There are several models
of Audio Port to choose from:
The AP300 provides the SpeakerLinX with line level audio in and out using stereo
RCA connectors. The AP300 also has an IR out to control local audio sources. This
IR out can also be configured to function as an audio in. Audio outputs are also
provided, which are useful for subwoofers or receivers.
The AP450 is designed for rooms only requiring line level audio output. This is
commonly used with subwoofers.
The AP500 has stereo RCA connections for line level audio in and out as well as a
connector for IR out.
Figure 2-17
Audio Port AP500
EIM2RCA Adapter
You can use the EIM2RCA adapter when you don’t want to install a faceplate in your
wall and you want to connect a SpeakerLinX with an external power amplifier or
source (such as an A/V receiver for a home theater). The EIM2RCA adapter has one
RJ45 connector on one end and two stereo pairs of RCA female connectors on the
other end for input and output.
Figure 2-18
EIM2RCA adapter
EIM2RCA Adapter