ClearOne DigiLinX - Manual (Page 77)

DigiLinX Installation and Design Guide
10-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
SW1124
The following are the specifications for the SW1048:
 technology store and forward architecture, non-blocking
 IP multicast supports IGMP snooping (256 multicast addresses)
 Dell certified, configured by NetStreams
 96 Gbps switching capacity
 24 1Gbps ports
 4 combo SFP ports
 standards: IEEE 802.3, IEEE 802.3u Fast Ethernet, 802.3ab Gigabit Ethernet,
802.3z Gigabit Ethernet, 802.1d Spanning tree, 802.1p priority tags (4 queues),
802.1q VLANS (up to 255), 802.1x Port-Based Authentications, 802.3ad link
aggregation, IAC:SNTP:GVRP support, broadcast storm control, 802.1w Rapid
Spanning Tree, 802.1s Multiple Spanning Tree, Jumbo Grames (9216 bytes), rate
limiting down to 64Kb
 Emissions: CE and FCC Class A approved
 Power supply, 100-240VAC, 50/60Hz Internal Universal
 connector: shielded RJ-45 jack
 LED indicators Link/Activity, Full Duplex Collision status for each port
 certification: CSA International, FCC Class A, CE Class A. CUL International
 environment operating temperature: 0
o
to 45
o
C (32
o
to 113
o
F)
 humidity: operating: 10% to 90 RH, non-condensing;
 NetPower: 0
 Weight: 3.6Kg
 Dimensions: 17.32” wide x 1.73”high x 10.03” deep (440mm x 44mm x 255mm)
 19” rack mountable
Installation
There are three ways to install the SwitchLinX depending on the model number.
Installing in a Rack (SW324 Only)
The SwitchLinX is packaged with two detachable rack ears for easy rack mounting.
1. Mount the SW324 on the back of the rack with the removable IEC power cord fac-
ing front.
2. Plug in all of the Ethernet connections.