Connectors, Installation, Installation -10 – ClearOne DigiLinX User Manual
Page 49
DigiLinX Installation and Design Guide
5-10
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
BURR-BROWN 24-bit/96KHz Analog-to-Digital converters
Power management sensor for Video, LED, or Level sensing of video sources for
audio playback
Balanced Audio Input - Phoenix Connectors
Integrated IR receiver
IR/RS-232 (two way) control of sources (cable included)
Includes three contact closures - two function as output contact closures and one
functions as a circuit closure detector
NTSC and PAL capable
LEDs for Signal detection, Power detection, and Activity status
Power State Sense Input
Dimensions: 9 1/2” high x 1 3/4” high x 8 2/3” deep (24mm x 45mm x 240mm)
Weight: 4 lbs (2.722 Kg)
NetPower: 4
ROHS compliant
Connectors
Video Input/Output Connectors
Video Connectors are BNC
Composite Input and pass-through (480i, 576i)
S-video Input and pass-through (480i, 576i)
Component Input and pass-through (480i, 480p,
720p, 1080i)
RGBHV Input (up to 1024 x 768 @ 60Hz)
Audio Input Connectors
One pair of analog RCA jacks (Gold Plated)
One Coaxial Digital (S/PDIF) (Gold Plated)
3-Position Phoenix Connectors - Balanced Audio
Audio Output Connectors
One pair of analog RCA jacks (Gold Plated)
One Coaxial Digital (S/PDIF) (Gold Plated)
Gigabit Ethernet Connection
RJ45
2-position Phoenix Connector - power20 - 32VDC
IR Emitter output/RS232
One 3.5mm
IR Receiver input
One included
3 Contact Closures
One input, Two output
Installation
The MediaLinX A/V is a half-rack width, 1U high device. Use a RS1U rack shelf to fit
two MediaLinX A/Vs per shelf. To fit only one MediaLinX A/V, use the blank plate