Programming ir codes, Programming ir codes -11 – ClearOne DigiLinX User Manual
Page 50
MediaLinX
5-11
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
provided with the RS1U. Screws are included to screw the rack mounted device on the
rack shelf.
Depending on its use, connect S/PDIF, component, composite, RGBHV, or S-Video. If
you are connecting it to a PC, you would use the VGA to BNC adapter for the
connection. Be sure to connect both Analog Audio and S/PDIF. Connect the Ethernet
CAT5 cable to the Ethernet port. Connect the power cable to the Power port.
Programming IR Codes
To program IR codes into the MediaLinX, refer to Chapter 5 in the DigiLinX Dealer
Setup Manual located on the Dealer Documents page on the NetStreams web site.