Installing free standing (all models) – ClearOne DigiLinX User Manual
Page 78
Advertising
SwitchLinX
10-5
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
3.
Plug in the power cord.
Installing in a Rack (SW1024 and SW1148 and SW1124)
The SW1024 and SW1048 are mounted in a rack with rack ears.
1.
Install the rack ears on the SW1024 or SW1048.
2.
Using the rack ears, install the SW1024 or SW1048 in a rack.
3.
Plug in all of the Ethernet connections.
4.
Plug in the power cord.
Installing Free Standing (all models)
To install a SwitchLinX as free standing, complete the following steps:
1.
Plug in all of the Ethernet connections.
2.
Plug in the power cord.
Advertising
This manual is related to the following products: