ClearOne DigiLinX - Manual (Page 90)

12-1
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Chapter
12
ViewLinX
The ViewLinX VL100/VL9100-CS is an IP-based audio/video decoder for
distributing multi-room video to a display. The ViewLinX features component, S-
Video, composite, or VGA video outputs as well as analog stereo and S/PDIF RCA
audio outputs for maximum flexibility. An RCA audio input is included for TV
monitor output. The VL100 also includes an RCA input for power management
sensing (video, level, or LED sensing), a 3.5mm IR/RS232 connection for easy control
of the display, an IR Receiver input connection (IR Receiver included), and a Phoenix
connector for power. An additional IR Out/RS232 connection provides two way
control of an A/V receiver. The relay output can drive a projector lift, motorized
screen, or other items. The commercial version of the ViewLinX, VL9100-CS,
features BNC connectors for the component, composite, S-Video outputs as well as a
VGA connector. A 3-position phoenix connector is used for balanced audio. Also
included on this version of the ViewLinX is the dual-RJ45 connector for the
multimedia wall plate (sold separately).
The ViewLinX can be mounted on the wall behind the display (wall bracket tabs
included), rack mounted, or used in a set-top box configuration. Various mounting
options are available for the ViewLinX: free-standing placed on top of a cabinet shelf
or TV (rubber feet included), wall mount, and rack mount.
See Figure 12-1 for a detailed picture of the VL100.