Track shoe & trackstop – Wheatheart WHR 130 x 31-36ft Augers PTO-SD User Manual

Page 16

Advertising
background image

3. A

SSEMBLY

WHEATHEART - GHR130 & WHR130 GRAIN AUGERS

3.3. T

RACK

S

HOE

& T

RACK

S

TOP

PTO-SD & EMD D

RIVE

M

ODELS

16

16652 R1

3.3. TRACK SHOE & TRACKSTOP

1. Slide

the

roller

track shoe onto track.

2. Attach the angle track stop to upper end of track as shown in Figure 3.2 and

3.3 using four 7/16" x 1-1/4" bolts, locknuts, and flat washers. Make certain
the flat iron washers are on top of track.

Important:

Only for 13" x 36':Track ends must align to allow track shoe to smoothly slide

over track joint. Misalignment may cause jamming.

Figure 3.2

3. Only for GHR130-36’: Slide track shoe along full length of track to make

certain there is no binding and that track ends are properly aligned. The
upper and lower tracks must align to allow track shoe to roll smoothly over
this joint (Figure 3.4).

A. 130-36’

B. 130-31’

Figure 3.4

Figure 3.3

Advertising
This manual is related to the following products: