Upper housing lubrication, Plastic manual holder – Wheatheart WHR 130 x 31-36ft Augers PTO-SD User Manual

Page 26

Advertising
background image

3. A

SSEMBLY

WHEATHEART - GHR130 & WHR130 GRAIN AUGERS

3.11. U

PPER

H

OUSING

L

UBRICATION

PTO-SD & EMD D

RIVE

M

ODELS

26

16652 R1

3.11. UPPER HOUSING LUBRICATION

Fill enclosed upper drive housing with grease.

For continuous use in extreme cold conditions, semi-fluid arctic grease or heavy
oil may be used.

3.12. PLASTIC MANUAL HOLDER

Before beginning installation, ensure that all
winch / auger lift controls are locked in place
and shut down and/or lock out auger.

1. Attach holder to the lower frame arms.

Manual holder must be accessible at all
times, whether frame is up or down.

2. The manual holder cap must face up

(towards the intake end). Attach manual
holder with supplied zip ties. Tighten the zip
ties, securing the holder in place.

Where possible, attach the zip ties above a

frame brace tab to prevent the manual holder

from slipping down the lower frame arms.

2200 g

78 oz

LOWER
REACH
ARMS

PLASTIC
ZIP TIES

CAP FACIN

G

INTAKE

Figure 3.19

Note:

Advertising
This manual is related to the following products: