ADS Environmental Services PrimeProbe2 QR 775016 A0 - Manual (Page 20)

PrimeProbe2 User Manual
16
Note: Fluctuating flow rates usually are an indication of poor
grounding.
Flow Direction
Prior to completing installation, confirm the direction of the flow in the
pipe. Using the nameplate as a reference, flow direction is positive when
the flow travels from
– to +.
If the flow occurs in reverse following installation, reverse the probe by
rotating it 180 degrees. Another option is to reverse the sign of the KA
Factor (refer to the Programming the Converter); however, ADS does not
recommend this option.