ADS Environmental Services PrimeProbe2 QR 775016 A0 - Manual (Page 26)

PrimeProbe2 User Manual
22
Menu Access System
This section applies only to the remote PrimeProbe2. Navigate through
the menu system using the keypad. The following table describes the 6
key functions:
Short Press <1 Second

Increases the numeric value or parameter selected
by the cursor

Goes to the previous item in the menu
Long Press >1 Second

Decreases the numeric value or parameter selected
by the cursor

Goes to the next item in the menu
Short Press <1 Second

Moves the cursor to the right in an input field

Goes to the next item in the menu

Changes the display of the process data
Long Press >1 Second

Moves the cursor to the left in an input field

Goes to the previous item in the menu
Short press <1 Second

Enters/edits the selected function

Enables the Main Menu for system configuration

Cancels the selected function in progress
Long Press >1 Second

Exits the current menu

Confirms/enables the selected function

Enables Totalizer Reset Request
Factory Presets
The PrimeProbe2 comes from the factory with the following
configuration:
 Dip switches in the OFF position
 Access Code L2 = 00000 (ADS recommends leaving for
PrimeWorks programming)