Baseline Systems FlowStation - Manual (Page 22)

Baseline FlowStation User Manual
4. Press the  button to highlight the Flow
Management option, and then press the OK
button to select it. The Flow Management
screen for the mainline displays.
5. In the Max Concurrent field, press the + or –
button to change the value.
6. Press the  button to move to the Limit
Concurrent field, and then press the + or – button to change the value in the field.
 If the mainline is currently limited by the number of concurrent zones, a checkmark
displays in the Limit Concurrent field. Press the + or – button to remove the checkmark.
 If mainline is currently not limited by the number of concurrent zones, there is no
checkmark in the Limit Concurrent field. Press the + or – button to add a checkmark.
Limiting a Mainline by Flow (Max Flow GPM)
1. On the FlowStation, press the Flow Setup button. The Flow Setup screen displays.
2. Press the  button to highlight the Main Line Setup option, and then press the OK button to
select it. The Main Line Setup screen displays.
3. Press the  button to highlight the mainline that you want to configure concurrent zones for,
and then press the OK button to select it. The Main Line # screen displays.
4. Press the  button to highlight the Flow
Management option, and then press the OK
button to select it. The Flow Management
screen for the mainline displays.
5. Press the  button to move to the Max Flow
GPM field, and then press the + or – button
to change the value in the field.
6. Press the button to move to the Limit GPM field, and then press the + or – button to change
the value in the field.
 If the zones operating from this mainline are currently limited by the max flow, a
checkmark displays in the Limit GPM field. Press the + or – button to remove the
checkmark.
 If the zones operating from this mainline are not currently limited by the max flow,
there is no checkmark in the Limit GPM field. Press the + or – button to add a
checkmark.
Page 18 4 – Configuring the FlowStation