Baseline Systems FlowStation - Manual (Page 31)

Baseline FlowStation User Manual
5. Press the OK button to back up the
programming data to the USB drive under the
currently selected location (1-5). The
FlowStation writes the data to a folder on the
USB drive that is named with the
FlowStation’s serial number.
6. When the FlowStation has finished writing
the backup file, unplug the USB drive from
the USB port.
Restoring the FlowStation Programming
This function restores all programming information in the FlowStation from a backup that you
made. We recommend that you use this function only as directed by Baseline Support.
1. Plug the USB drive that has the backup file on it into the USB port on the FlowStation.
2. Press the System Setup button. The System Setup menu displays.
3. Press the  button to highlight the Backup & Restore option, and then press the OK button
to select it. The Backup & Restore screen displays.
4. Press the  button to highlight the USB Restore option, and then press the OK button to
select it. The USB Restore screen displays.
5. Press the  button to highlight the backup
version that you want to use for the restore,
and then press the OK button to select it. The
restore selection screen displays.
6. Press the  button to highlight the type of
restore that you want to perform, and then
press the OK button to restore the
programming data from the backup stored on
the USB drive.
7. When the FlowStation has finished restoring the programming from the backup file, unplug
the USB drive from the USB port on the FlowStation.
Updating the Firmware on the FlowStation
Firmware updates are free for the life of any FlowStation as long as the hardware is compatible.
Baseline will periodically release firmware upgrades that enhance the usefulness of our products or
fix the occasional bug.
You get the firmware update for your FlowStation from the Baseline web site with a USB drive. You
will need a computer with a USB port. This computer must have access to the Internet. You also
need a USB drive. You download the firmware from the Baseline web site to the USB drive. Then,
you take the USB drive to the FlowStation and install the update.
We recommend that you back up your current configuration before starting this process in case
you need to restore your system. Refer to Backing Up the FlowStation Programming on page 26.
Note: The following procedure assumes that your computer is running Microsoft Windows.
4 – Configuring the FlowStation Page 27