Baseline Systems FlowStation - Manual (Page 30)

Baseline FlowStation User Manual
4. Press the  button to highlight the first digit of the Admin PIN, and then press the + or –
button to change the number.
5. Press the  button to move to the next digit, and then press the + or – button to change the
number. Repeat this step until you have configured all digits of the PIN.
6. Press the  button to highlight the next PIN, and then configure all digits of the PIN. Repeat
until you have configured all of the PINs.
Clearing the Programming on the FlowStation
This function will clear or erase all programming information from the FlowStation. We recommend
that you use this function only as directed by Baseline Support.
IMPORTANT NOTE! Never clear your programming data without having a current backup available
for a restore. Refer to Backing Up the FlowStation Programming on page 26.
1. Press the System Setup button. The System Setup menu displays.
2. Press the  button to highlight the Clear Programming option, and then press the OK button
to select it. The Clear Programming screen displays.
3. To clear all programming data, press the + button.
Note: To exit this screen without clearing all programming in the FlowStation, press the BACK
button.
Backing Up the FlowStation Programming
The FlowStation allows you to back up the programming to a USB drive (also called a flash drive or
a thumb drive). We recommend that you back up a stable version of your FlowStation’s
programming to a USB drive on a regular basis. You can save 5 backups identified by date and time.
We recommend that you create a backup before you make significant changes to the programming
on your FlowStation. After you verify that the new programming is satisfactory, create a new
backup to preserve those changes.
1. Plug the USB drive into the USB port on the FlowStation.
2. Press the System Setup button. The System Setup menu displays.
3. Press the  button to highlight the Backup & Restore option, and then press the OK button
to select it. The Backup & Restore screen displays.
4. The USB Backup option should be highlighted. If it is not highlighted, press the  button to
highlight it, and then press the OK button to select it. The USB Backup screen displays.
Page 26 4 – Configuring the FlowStation