Baseline Systems FlowStation - Manual (Page 34)

Baseline FlowStation User Manual
Status Reports and Messages
The main screen shows information about the operating state of the FlowStation. The FlowStation
provides the following categories of reports and each category can have multiple reports.
• Controller Status
• Program Status
• Master Valve/Pump Status
• POC Status
• Mainline Status
• Operator Messages
Viewing the Controller Status Report
1. When the FlowStation is in the Run menu, the Controller Status report typically displays on
the screen. If you do not see “CONTROLLER STATUS” and the list of controllers, press the RUN
button to make sure that the FlowStation is in
the Run menu, and then press the BACK
button to display the Status Report menu.
2. The Controller Status option should be
highlighted. If it is not, press the  or 
button to highlight it, and then press the OK
button. The Controller Status screen displays.
3. To return to the Status Report menu, press the BACK button.
Understanding Controller Statuses
The following icons identify the status of the controllers in the Shared Flow Group:
Icon Status Description
Unassigned No controller is assigned
Done The complete cycle has finished for this controller – including
watering and soaking
Watering Watering is in progress
Paused A pause condition is in effect
OFF The controller is set to OFF
Disabled The controller is marked as being disabled
Disabled or
Disconnected
The controller is marked as being disabled or disconnected from
the FlowStation
Message There is a message associated with this controller
Page 30 4 – Configuring the FlowStation