Bio-Rad Gel Doc™ XR+ System - Manual (Page 14)

Page 14 of 42
Upon completion of the Camera installation, refer to Section 4.2.3 and Appendix A for a
complete description of the cable connections.
ChemiDoc  XRS
a) Place the Camera on the bench so that the locking hole of the tripod mount is facing you.
b) Fix the ChemiDoc
 XRS bracket to the Camera, do not tighten the screw.
c) Place the black adapter ring (6 millimeters thickness) on the top of the hood with its soft
side facing up.
ChemiDoc

XRS Camera with bracket
Black adapter ring for ChemiDoc  XRS Camera and its positioning on the top of the Hood
d) Position the ChemiDoc  XRS Camera over the opening on the top of the enclosure by
inserting the lens through the adapter ring. Make sure that the lens is in close contact
with the black adapter ring. Adjust the Camera position such the lens is well centered in
the opening of the hood (see below).
Tripod Mount