Bio-Rad Gel Doc™ XR+ System - Manual (Page 37)

Page 37 of 42
Appendix C: Installing Software and Drivers
Gel Doc  XR and ChemiDoc  XRS- PC:
CAUTION: You must install the drivers BEFORE installing the PCI card.
a. Insert the Discovery Series CD into the CD ROM drive of the PC. It will go into AUTO
RUN mode and the following window will open:
a. Depending on which application you are using (Quantity One  or PDQuest), click
“Install” to run the installer.
b. If this is a new installation, follow the installation steps until you get to the “Select
Features” dialog box. If you have already installed the application, click Modify to open
the “Select Features” dialog box.