When the language selection screen appears – Canon HDMI SX800 User Manual
Page 48
Starting Projection
48
5
Press the AUTO SET button.
The auto setup function performs the following operations automatically:
SX80:
focusing and keystone distortion adjustment, input signal setting, and
screen color correction
SX800: keystone distortion adjustment and input signal setting
For more details, refer to the page
.
If the projector is projecting an image properly with [AUTO SETUP], the projection is
complete.
In SX800, adjust the focus and correct the screen color manually.
For how to turn off the projector, refer to the page
. Perform the appropriate opera-
tion depending on the following situations.
■When the Language Selection Screen Appears
A window appears when the projector is turned on for the first time. You can select a lan-
guage to be used by the projector for displaying menus and messages in the window.
Select the desired language with the pointer buttons and press the OK button.
You can change the language from the menu at a later time. (
If you cannot check the language selection screen due to the out of focus, press the
FOCUS button to adjust the focus. (
)
Changing Operations When Projector is Turned On
You can change operations when the projector is turned on as follows:
• You can turn on the projector by connecting the power cord without pressing the
POWER button. (
• You can specify whether to enable or disable the LED illumination lamp. (
)
• You can change the countdown window. (
)
• You can skip the countdown window. (
)
Using the Power Saving Mode (power management)
When you enable the power management mode, the lamp is automatically turned
off if the projector receives no signal input for a certain period of time. (
)
An item highlighted in orange will be selected.
Remote control
Top control