Iris Sample Processing StatSpin® ThermoBrite Denaturation and Hybridization - Manual (Page 16)

12
Press “Enter” button to accept the program values; or press “Backspace” button to return to previous
screen to modify program values; or press “Stop” button to abort.
Creating a Fixed Temperature Program (Fixed Temp )
From the Main Screen, use the arrow keys to move cursor to “Create a PGM” and press “Enter” button
to accept.
With arrow keys move cursor to “Fixed Temp” line and press “Enter” button to accept.
ThermoBrite will advance to the next available program number.
PGM 03 name
Enter Temp
Fixed: °C
(Reference Character Selection for additional information in regards to working with the keypad.)
Cursor advances to “Fixed Temp”. With numeric keypad enter a two-digit temperature value in degrees
Celsius (30-99ºC). The instrument allows a temperature of 30

C or ambient temp + 5

C (whichever is
higher) for the lowest fixed temperature. For room temperature fixed enter the two-digit value 00.
Display will now show entered program values. Cursor highlights “Enter to Accept” line.
PGM 03 Appl
Fixed: 65°C
ENTER to Accept
STOP to Abort
Press “Enter” button to accept the program values; or press “Backspace” button to return to previous
screen to modify program values; or press “Stop” button to abort.
Editing a Program
From the Main Screen, use the arrow keys to move cursor to “Edit a PGM” and press “Enter” button to
accept.
With the arrow keys scroll through the program numbers 1 to 40 / program names. If no programs have
been saved advance to programming section of this manual.
To accept, press “Enter” button.
PGM 04 HPV
92°C :05; 37°C 16:00
Denat & Hyb
Main Menu
Cursor highlights existing program type: “Denat & Hyb”, “Hyb only” or “Fixed Temp”. Press “Enter”
button to accept existing program type or use arrow keys to move cursor to a different program type. Press
“Enter” button to accept.
Use numeric keypad to enter new values for Temperatures and/or Time. Procedure and limits are the
same as those for creating a program.
Note: ThermoBrite allows 40 programs to be entered and stored. Once all program numbers have been
used an existing program must be edited.