Iris Sample Processing StatSpin® ThermoBrite Denaturation and Hybridization - Manual (Page 4)

iii
How to use this manual
This manual along with information contained on product labels should provide you with all the
information you need to operate and maintain the ThermoBrite.
Notes appear in italics to highlight information. When the information requires special attention, a
caution symbol appears next to the italicized text.
Please pay close attention to the instructions that accompany the notes and symbols as well as the
standard laboratory practices outlined by your facility and local regulatory agencies. The table below
lists all the CAUTIONS / WARNINGS for the ThermoBrite.
WARNING – Plug the instrument into a properly grounded outlet supplying the
voltage and frequency indicated on the serial number label.
CAUTION – Unplug the ThermoBrite from the wall outlet before performing
maintenance.
WARNING – Do not expose StatSpin ThermoBrite to strong or concentrated acids,
bases, esters, aromatic or halogenated hydrocarbons, ketones or strong oxidizing
agents.
CAUTION - Universal Precautions should be followed on all specimens, regardless
of whether a specimen is known to contain an infectious agent. (See references)
CAUTION –Risk of electric shock: The instrument contains no user serviceable
parts. Removal of housing will expose potentially lethal voltage. Refer service to
qualified service personnel.
CAUTION – Hot Surface: The interior surface of the instrument may be HOT, use
caution to avoid potential burn.
CAUTION - Do not use paper towels or any other filter card in card positions. This
may change the humidity and may decrease the intensity of the probe, potentially
causing erroneous results.
Please use the system as intended. Improper use of the StatSpin ThermoBrite may cause damage
to the system, inaccurate results, or potentially nullify warranties.