ITC Hemochron Response Whole Blood Coagulation System User Manual
Page 12
12
To Display the Supervisor Menu:
1.
Display the second page of the main menu.
2.
Press 4 to display the Enter Passcode prompt. Enter the passcode.
3.
Press YES to accept. The first page of the Supervisor menu is displayed.
4.
Press MENU once or twice to display the second or third page of the Supervisor menu.
Note: The next or previous pages can also be displayed by pressing 0 or 9.
Setting the Time
The time that a test is performed is automatically recorded with the test result. Specify the time format prior
to setting the time.
Note: Use a 24-hour or a 12-hour format.
1.
Display the first page of the Supervisor menu.
2.
Press 1. The Time/Date Setup menu is displayed.
3.
Press 1. The Set Time prompt is displayed with the current time.
4.
Enter the correct time using the numeral keys.
5.
Press YES to save the new time.
Note: Pressing CANCEL cancels the procedure without saving the new time.
Setting the Date
The date the test is performed is automatically recorded with the test result.
1.
Display the first page of the Supervisor menu.
2.
Press 1. The Time/Date Setup menu is displayed.
3.
Press 2. The Set Date prompt is displayed with the current date.
4.
Enter the correct date using the numeral keys.
Note: The date can be entered using either a MON/DAY/YEAR or a YEAR/MON/DAY format.
5.
Press YES to save the new date.
Note: Pressing CANCEL cancels the procedure without saving the new date.
Specifying the Time Format
The time can be entered and reported in either 24-hour format or 12-hour format.
1.
Display the first page of the Supervisor menu.
2.
Press 1. The Time/Date Setup menu is displayed.
3.
Press 3. The time formats are displayed.
4.
Press 1 to select the 12-hour clock mode. Press 2 to select the 24-hour clock mode.
5.
Press YES or CANCEL.
Note: The arrow points to the currently selected option.
Specifying the Reported Date Format
The date can be reported in either MON/DAY/YEAR format or YEAR/MON/DAY format.
To Change the Date Format:
1.
Display the first page of the Supervisor menu.
2.
Press 1. The Time/Date Setup menu is displayed.
3.
Press 4. The date formats are displayed.
4.
Press 1 to select the MON/DAY/YEAR mode. Press 2 to select the YEAR/MON/DAY mode.
5.
Press YES or CANCEL.
Note: The arrow points to the currently selected option.
Printed From ITC Intranet