ITC Hemochron Response Whole Blood Coagulation System - Manual (Page 14)

14
Specifying the Length of Time a PID will be Reused
After a PID is entered, it can be displayed as a default entry for a specified number of hours.
1.
Display the first page of the Supervisor menu.
2.
Press 2 to display the PID Setup menu.
3.
Press 3 to display the Enter Reuse Hrs prompt. Enter the number of hours.
Note: 0 to 240 can be entered. If 0 is entered, the entered PID will not be reused.
Requiring Entry of an OID or PIN
1.
Display the first page of the Supervisor menu.
2.
Press 3 to display the OID Setup menu:
3.
Press 1 to display the OID Requirements menu:
4.
Specify whether and how OID entry will be required (only one can be specified):
• Press 1 if entry of OID or PIN will not be required.
• Press 2 if entry of OID (any OID) will be required.
• Press 3 if entry of a valid OID will be required.
• Press 4 if entry of a PIN will be required.
Note: If entry of an OID or PIN is specified as required, a reminder message will appear on
the instrument display panel. Only the OID is printed with results or stored in the database.
Note: A valid OID is one that is entered on the Edit User Codes list (page 15).
Specifying the Length of Time an OID will be Reused
After an OID is entered, it can be displayed as a default entry for a specified number of hours.
1.
Display the first page of the Supervisor menu.
2.
Press 3 to display the OID Setup menu.
3.
Press 5 to display the Enter Reuse Hrs prompt. Enter the number of hours.
Note: 0 to 240 can be entered. If 0 is entered, the entered OID will not be reused.
If valid PIN is required, reuse is not allowed.
Printed From ITC Intranet