FRIGIDAIRE FGUB2642LF - Manual (Page 25)

25

NOTE
Features may vary according to model.
STORAGE FEATURES
Your refrigerator includes SpillSafe TM glass shelves
that are designed to catch and hold accidental spills.
You can easily adjust shelf positions in the fresh
food compartments to suit your needs. The shelves
have mounting brackets that attach to slotted
supports at the rear of each compartment.
To change the position of a shelf:
1. Remove all food from shelf.
2. Lift the front edge up and pull the
shelf out.
3. Replace by inserting the mounting bracket
hooks into the desired support slots.
4. Lower the shelf and lock into position.
Shelf features
Crispers
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce.
Drawers
Your refrigerator includes a variety of storage
drawers. These drawers are located in fixed positions
at the bottom of the fresh food compartment.
Crisper humidity control
Crisper drawers include a sliding control for adjusting
the humidity inside the crisper. Leafy vegetables keep
best when stored with the Humidity Control set on
Higher Humidity. Fresh fruits keep best when stored
with the Humidity Control set on Lower Humidity.
To remove the Crisper Drawer for cleaning:
1. Pull the drawer out until it stops.
2. Lift the front slightly and remove
the drawer.
CAUTION
To avoid personal injury or property damage,
handle tempered glass shelves carefully. Shelves
may break suddenly if nicked, scratched, or
exposed to sudden temperature change. Allow
the glass shelves to stabilize to room temperature
before cleaning. Do not wash in dishwasher.
Full SpillSafe TM Shelf
Half SpillSafe TM Shelf
Opening Crisper Drawer
Adjusting Crisper Humidity
Vegetables Fruits
hi lo
Higher
Humidity
Lower
Humidity
humidity control
Removing Crisper Drawer