FRIGIDAIRE FGUB2642LF - Manual (Page 7)

7

NOTE
View shown is looking up at the bottom of
the refrigerator door.
2. You can raise or lower each door.
Use a 3 /
8
” socket wrench to turn the
adjustment screws (1 per side).
To raise: turn adjustment
screw clockwise.
To lower: turn adjustment
screw counterclockwise.
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
four sides and that cabinet is stable.
4. After unit is leveled, lower anti-tip leg
until it contacts the floor.
Raise
Anti-tip
Leg
Door
Lower
Door
5. Install the toe grille by fitting into place.
To adjust the door stop:
Door stop is adjustable between 85 to
145 degrees.
1. Open door to provide access to screw.
2. Loosen screw.
3. Adjust door to desired location.
4. Rotate door stop until it makes contact
with the lower hinge.
5. Retighten screw.
6. Ensure door stops in desired location
before resuming normal use.
Rotate
Door to Desired
Location
Adjusting Door
Rotate
Door
Stop
Re-tighten
Screw
Retighten Screw
Adjustable Door Stop
Lower
Hinge
Door
Stop
Screw
Min
Open
Max
Open
INSTALLATION