Dell POWEREDGE R610 - Manual (Page 123)

Installing System Components 123
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Prior to upgrading your system, download and install the latest system
BIOS version from support.dell.com. Follow the instructions included in
the file download to install the update on your system.
2 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
3 Open the system. See "Opening the System."
CAUTION: Never remove the heat sink from a processor unless you intend to
remove the processor. The heat sink is necessary to maintain proper thermal
conditions.
4 Open one of the heat-sink retention latches by pressing the end of the
latch, moving it laterally, and lifting the latch upwards. See Figure 3-19.
Figure 3-19. Installing and Removing the Heat Sink
5 Wait 30 seconds for the heat sink to loosen from the processor.
6 Open the other heat-sink retention latch.
1 heat sink 2 heat-sink retention latch (2)
1
2