Clarion FZ709E - Manual (Page 12)

16
English
FZ709E
Radio Mode Operations
Listening to the radio
1. Touch the [ ] key to switch to Source menu.
2. Select “TUNER” to enter Radio mode. The
frequency or PS and PTY appears in the dis-
play.
PS: Programme service name
PTY: Programme type
3. To select a preset band, touch the [ ] key and
then select one of the preset bands such as
FM1, FM2, FM3 or AM1.
Every time the [ ] key is touched, the band
switches in the following order:
FM1 FM2 FM3 AM1 FM1...
4. Touch the [ ]/[ ] key to tune in the desired
station.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable
broadcast stations; LOCAL SEEK can tune in to
only broadcast stations with a good reception
sensitivity.
1. Touch the [ ] key and select the desired band
(FM or AM).
∗ If is lit in the display, touch and hold the
[ ] key for 1 second or longer. in the
display goes off and seek tuning is now avail-
able.
∗ If is lit in the display, TP stations are auto-
matically sought.
2. Touch the [ ]/[ ] key to start automatic sta-
tion tuning.
When the [ ] key is touched, the station is
sought in the direction of higher frequencies;
if the [ ] key is touched, the station is sought
in the direction of lower frequencies.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
CT(Clock Time) function
The CT function receives CT data sent from
an Radio Data System station and displays the
time.
∗ If a CT data is not being received, “ ” ap-
pears in the display.
Note:
CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
Basic Operations