Clarion FZ709E - Manual (Page 37)

41
English
FZ709E
TROUBLESHOOTING
Use your phone to manually connect
or select from the unit.
After pairing, car stereo
is not able to receive and
make calls.
Problem Cause Measure
Bluetooth ® connection is not
established yet.
Normally it will take several seconds
to establish the connection after
pairing.
Some phones will not automatic
connect after pairing.
Telephone
If the problem persists, please visit
www.clarion.com for your phone
compatibility.
Power off and on the car stereo
and perform pairing again. Always
make sure pairing information on
both device and main unit have
been deleted before starting a new
pairing activity.
Car stereo is connected to other
device.
The device pairing information may
have been deleted from the unit.
Unable to reconnect to
car stereo using phone.
Disconnect the previous device and
reconnect current device.
Perform the above measure.
There is no sound output
when incoming call is
answered.
There is no sound output
during conversation.
Cannot operate the
handsfree function
properly.
Incoming call was answered too
quickly before you hear the ringing
tone. This can cause the audio not
properly transferred to the main unit
by some phones.
Please use your phone to transfer
the audio back to the phone for the
current ongoing call.
Kindly answer the call only when you
hear a ringing tone next time.
If the problem persists, please
reconnect the phone or create new
pairing before the next incoming
call.
Bluetooth ® communication link is
lost.
Please disconnect the phone and
reconnect.
If the problem persists, please
create new pairing for both phone
and main unit.
No response from mobile phone. Turn off and on the mobile phone.