Clarion FZ709E - Manual (Page 30)

34
English
FZ709E
Bluetooth
®
Operations
BOOK TYPE
The unit provides 3 types of phone book which
are stored in memory.
∗ The factory default setting is “TYPE 3”.
1 - 1 .
Select “BOOK TYPE”.
1 - 2 . Touch the [ ] key to enter detail setting
stage.
1 - 3 .
Slide along [ ] slider or touch [ ]/[ ] key
to select the setting in sequence “TYPE1”,
“TYPE 2” or “TYPE 3”.
1 - 4 . “ALL MEMORY IS DELETED” is dis-
played.
1 - 5 . Touch [ENT] key for 2 seconds to change
setting.
TYPE
PHONE
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
1 2 3
250 pieces 200 pieces 100 pieces
250 pieces 100 pieces 100 pieces
0 piece 100 pieces 100 pieces
0 piece
50 pieces 100 pieces
0 piece 50 pieces 100 pieces
Note:
Once setting is changed, all previous stored phone-
book data will be cleared.
RING VOL
This option is used to change the ringing volume
by each paired mobile phone device.
∗ The factory default setting is 5.
(Adjustment level: 1 to 10)
1 - 1 . Select “RING VOL”.
1 - 2 . Touch the [ ] key to enter detail setting
stage.
1 - 3 . Slide along [ ] slider or touch [ ]/[ ]
key to change the ringing volume.
AUTO ANSWER
This is a setting to determine whether any in-
coming call will be automatically or manually
answered.
∗ The factory default setting is “OFF”.
1 - 1 .
Select “AUTO ANSWER”.
1 - 2 .
Touch the [ ] key to enter detail setting
stage.
1 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select “ON” or “OFF”.
ON
Any incoming call is automatically answered
in 5 seconds.
OFF
User needs to manually answer the call.
ON
Automatic connection is enabled.
OFF
Automatic connection is disabled.
Note:
If user disconnect the device from this unit, the unit
will not try to connect to the device automatically
even if the “AUTO CONNECT” is set to “ON”.
AUTO CONNECT
This function allows this unit to be connected au-
tomatically with previously connected device.
∗ The factory default setting is “OFF”.
1 - 1 .
Select “AUTO CONNECT”.
1 - 2 .
Touch the [ ] key to enter detail setting
stage.
1 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select “ON” or “OFF”.