Clarion FZ709E - Manual (Page 33)

37
English
FZ709E
Common Operations
When code is registered
3 - 3 . Slide along [ ] slider or touch [ ]/[ ]
key to input the registered code.
3 - 4 . Touch [ ] / [ ] key to set the previous or
next digit.
Note:
Write down your personal code in case you forget
it.
3 - 6 .
“MEMORY XXXX” will be displayed for 2 sec-
onds where “XXXX” is the entered digits.
3 - 6 . If successfully delete the registered code,
“DELETED” will be displayed for 2 seconds
and back to 1 st item.
3 - 7 . If unsuccessfully delete the registered code,
“FAILED” will be displayed for 2 seconds and
back to the “INPUT 0000” display.
3 - 5 . During finish adjustment, touch [ENT] key for
2 seconds to confirm.
Turning the screen saver function on
or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns in the operation status indication area of
the display in a random order. You can turn on or
off this function. If the key operation is performed
with the screen saver function on, the opera-
tion display corresponding to the key operation
is shown for about 30 seconds and the display
returns to the screen saver display.
∗ The factory default setting is “ON”.
3 - 1 . Select “SCREEN SAVER”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 . Slide along [ ] slider or touch [ ]/[ ]
key to select “ON” or “OFF”.
Setting the scroll speed
This function allows you to adjust the speed of
the title scroll.
∗ The factory default setting is “3”.
3 - 1 . Select “SCROLL SPEED”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 . Slide along [ ] slider or touch [ ]/[ ]
key to adjust the speed value. (Parameter
range: 1~5)
OFF
To scroll just 1 time.
ON
To scroll automatically.
Setting the method for title scroll
Set how to scroll in MP3/WMA/AAC title.
∗ The factory default setting is “ON”.
3 - 1 . Select “AUTO SCROLL”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select “ON” or “OFF”.