Clarion FZ709E - Manual (Page 36)

40
English
FZ709E
TROUBLESHOOTING
Reconnect A2DP/AVRCP (Audio
streaming profiles) from the phone
again after telephone interrupt.
Audio streaming is
disconnected after
telephone interrupt.
Problem Cause Measure
This is probably happen when audio
streaming and telephone function
are from the same device (mobile
phone).
Dependent on phones.
BT
Audio
If your phone is facing this problem,
please do not use your phone while
audio streaming.
Audio streaming will begin
to pulse on/off when using
your connected phone.
Disconnect and pair the device
again.
AVRCP is not connected.
Due to excessive Bluetooth ® activity
on a low bandwidth link. Some
phones will not handle this well.
Cannot perform remote
control for audio
streaming.
Display is showing device
name connected but there
is no sound output.
The external audio device may in
Pause status.
Some Bluetooth ® audio devices
might not support AVRCP.
There might be connection links
broken between the devices.
Check whether both device and main
unit are in play status. Change the
status in the device if necessary.
If problem persists, please power off
and on the main unit or the device.
Please delete pairing information
on both device and main unit and
start re-pairing.
∗ Advanced Audio Distribution Profile (A2DP) is used for Bluetooth ® audio streaming support.
∗ Audio Video Remote Control Profile (AVRCP) is used for controlling audio streaming playback.
The device might not support audio
streaming.
Please check your phone whether it
supports Bluetooth ® audio streaming
or visit www.clarion.com for your
phone compatibility.