Clarion FZ709E - Manual (Page 8)

12
English
FZ709E
Basic Operations
Title mode Indicator mode Clock
Example: iPod
Sound adjustments
You can adjust a sound effect or tone quality to
your preference.
∗ When CT data is not received, “ ” ap-
pears in the display for Title mode and Indicator
mode, while “ ” appears in the display for
Clock mode.
Setting the BEAT EQ
This unit is provided with 4 types of sound tone
effects stored in memory. Select the one you pre-
fer.
∗ The factory default setting is “OFF”.
3 - 1 .
Select “BEAT EQ”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 . During detail setting stage, each time your
slide along [ ] slider or touch [ ] / [ ]
key, the tone effect changes in the following
order:
“OFF” “BASS BOOST” “IMPACT”
“EXCITE” “CUSTOM”
OFF : No sound effect
BASS BOOST : Bass emphasized
IMPACT : Bass and treble emphasized
EXCITE : Bass and treble emphasized
mid emphasized
CUSTOM : User custom
1 . Touch the [ ] key to switch to ADJ menu.
2 . Select “SOUND” in the menu to enter
Sound Adjustment mode.
3 . Slide along the [ ] slider or touch [ ] /
[ ] key, the Sound Adjustment mode
changed as following order:
“BEAT EQ” (“BASS” “MID”
“TREBLE”) ∗ 1 “BBE MP” ∗ 2
“BALANCE” “FADER”
“M-BEX” “HPF” “S-W LPF”
“S-W VOL” “BEAT EQ”...
Notes:
∗ 1
: BASS/MID/TREBLE are only available if
“CUSTOM” is selected in “BEAT EQ”.
∗ 2
: BBE MP is only available if “USB” is
selected in source mode and the “OUTPUT
FORM” is set to “DIGITAL”. (Please refer to
page 30)
To change sound setting
Switching the display layout
1. Touch the [ ] key for more than 1 second to
switch display layout.
2. Each time you touch the [ ] key for more
than 1 second, the display layout switches in
the following order:
∗ Once selected, the preferred title display becomes
the display default. When a function adjustment
such as volume is made, the screen will momen-
tarily switch to that function’s display, then revert
back to the preferred title display several seconds
after the adjustment.
∗ If the key operation is performed with the screen
saver function on, the operation display corre-
sponding to the key operation is shown for about
30 seconds and the display returns to the screen
saver display. For details, refer to the subsection
“Turning the screen saver function on or off” in
section “Common Operations”.