Clarion FZ709E - Manual (Page 13)

17
English
FZ709E
DX SEEK
When the [ ] key is touched, search will be per-
forming in the direction of higher frequencies.
When the [ ] key is touched, search will be per-
formed in the direction of lower frequencies.
∗ When seek tuning starts, “DX SEEK” appears in
the display.
Step tuning
Touch the [ ] / [ ] key to perform manual tun-
ing.
∗ If no operation is performed for more than 7 sec-
onds, manual tuning is cancelled and the display
returns to the previous mode.
Quick tuning
Touch and hold the [ ] / [ ] key for 1 second or
longer to begin station tuning.
Radio function
You need to enter the TUNER OPTION to per-
form the Radio function.
Manual tuning
There are 2 ways available:
Quick tuning and step tuning.
When you are in the step Tuning mode, the fre-
quency changes one step at a time. In the Quick
Tuning mode, you can quickly tune the desired
frequency.
1. Touch the [ ] key and select the desired band
(FM or AM).
∗ If is not lit in the display, touch and hold
the [ ] key for 1 second or longer. is lit
in the display and manual tuning is now avail-
able.
2. Tune into a station.
LOCAL SEEK
If the key is touched and held in position for 1
second or longer, local seek tuning will be en-
abled. Broadcast stations with good reception
sensitivity are selected.
∗ When local seeking starts, “LO SEEK” appears in
the display.
Radio Mode Operations
Preset memory function
Preset memory function can store up to 24 sta-
tions: Six stations for each of FM1, FM2, FM3,
and AM1.
TUNER OPTION
1 . During Tuner mode, touch the [ ] key to
switch to ADJ menu.
2 . Select “OPTION” in the menu to enter
Tuner Option mode.
3 . Slide along [ ] slider or touch [ ]/[ ]
key, the TUNER OPTION mode changed
as following order:
“P.CH MEMORY” (“PTY”
“PTY SELECT” “AF” “REG”)
“LANGUAGE” “PRESET SCAN”
“AUTO STORE” “P.CH MEMORY”...
Notes:
Items in bracket (PTY, PTY SELECT, AF, REG)
are called Radio Data System Adjustment
mode. Please refer to page 20 for Radio Data
System Adjustment mode.
“PTY SELECT” only available when “PTY” is
on.
“REG” only available when “AF” is on.
Manual memory function
3 - 1 .
Select “P.CH MEMORY”.
3 - 2 .
Touch [ ] key to enter detail setting stage.
3 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select the preset channel number to
be stored.
3 - 4 . Touch [ENT] key for 2 seconds to store the
frequency into the selected preset channel.
3 - 5 . “MEMORY” is displayed for 2 seconds before
revert to main display.