Clarion FZ709E - Manual (Page 38)

42
English
FZ709E
7. ERROR DISPLAYS
ERROR 3
(USB mode)
Error Display Cause Measure
USB/iPod
The files are not proper MP3/WMA/
AAC format.
Use only properly encoded MP3/
WMA/AAC files.
The MP3/WMA/AAC files are
improperly encoded.
Use only properly encoded MP3/
WMA/AAC files.
The iPod contains no audio files. Insert an iPod containing audio
files.
Do not support the HUB devices.
Disconnect the devices and
reconnect. If the devices are still
not recognized, try replacing with a
different devices.
Do not use the HUB devices.
Over current detection.
ERROR 3
(iPod mode)
CUR ERR
HUB ERR
ERROR 2
Error Display Cause Measure
BLUET
OOTH
®
No Bluetooth ® device is found within
range.
Please turn on the Bluetooth ® device
and place the device within range of
reception.
FAILED
Device or unit is not in pairing mode
or wrong pass key is entered.
Please make sure both the unit and
device is in pairing mode and enter
the correct pass key.
Please manually pair and reconnect
the device.
The device pairing information might
have been lost.
A2DP device is not connected. Please manually pair and connect the
A2DP device.
∗ If an error display other than the ones described above appears, press the reset button. If the problem persists,
turn off the power and consult your nearest service dealers.