Reinstalling power supplies – Cisco XR 12410 User Manual
Page 109
3-27
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Chapter 3 Installing the Cisco XR 12410 Router
Reinstalling Components After Installing the Chassis
Step 2
Prepare the other end of the grounding wire and connect it to the appropriate
grounding point at your site to ensure an adequate earth ground.
Reinstalling Components After Installing the Chassis
This section describes how to reinstall the components that you removed before
installing the chassis in the rack. It also describes how to reconnect cables to line
cards, the RP, and alarm cards.
Reinstalling Power Supplies
Use the following procedures to reinstall the AC or DC power supplies.
•
To reinstall AC PEMs, go to
Reinstalling AC PEMs, page 3-28
•
To reinstall DC PEMs, go to