Cisco XR 12410 - Manual (Page 221)

A-3
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Appendix A Technical Specifications
Router Specifications
Caution To ensure that the chassis configuration complies with the required power
budgets, use the on-line power calculator. Failure to properly verify the
configuration may result in an unpredictable state if one of the power units fails.
Contact your local sales representative for assistance.
Table A-2 AC Electrical Specifications
Description Value
Total AC Input Power 3000 VA (volt-amps) per AC power supply
(2 AC power supplies per system)
Rated input voltage
1
1. For each AC power supply module.
200–240 VAC nominal (range: 180 to 264 VAC)
220–240 VAC (UK)
Rated input line frequency
1
50/60 Hz nominal (range: 47 to 63 Hz)
50/60 Hz UK
Input current rating
1
15 A maximum @ 200 VAC
13 A maximum @220 to 240 VRMS (UK)
Source AC service
requirement
1
20 A North America; 16 A international;
13 A UK
Heat dissipation
(total maximum)
2800 W@9,544 BTU/hour
Redundancy 2 AC power supply modules required for 2N
redundancy
Table A-3 DC Electrical Specifications
Description Value
Total DC Input Power 2800 W per DC power entry module
Rated input voltage
1
–48 VDC nominal in North America
–60 VDC nominal in the European Community
(range: –40.5 to –72 VDC (–75 VDC FOR 5mS))
Input current rating
1
40 A maximum (2x)