Cisco XR 12410 - Manual (Page 66)

Chapter 2 Preparing for Installation
Site Requirement Guidelines
2-16
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
You must terminate DC power cables using cable lugs at the power shelf
end.Ensure the lugs are dual-hole and that they fit over M6 terminal studs at
0.625-inch (15.88-mm) centers (for example, Panduit Part Number LCD8-14A-L
or equivalent).
Figure 2-8 shows the type of lug required for DC-input cable connections.
Figure 2-8 DC Power Cable Lug
Crimp area
25527
2.24
0.48
0.08
0.25 0.37 0.63
End View
Ø 0.267
2 holes
All measurements in inches