Cisco XR 12410 - Manual (Page 186)

Chapter 5 Maintaining the Router
Removing and Replacing AC and DC Power Subsystem Components
5-14
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Removing and Replacing an AC PEM
This section contains the procedure to remove and replace an AC PEM from the
chassis.
Figure 5-7 identifies the components of an AC PEM.
Figure 5-7 AC PEM Components
1 Status indicators 3 Ejector lever
2 Handle 4 Power ON/OFF switch (shown in the ON/1
position)
0
PWR OK
FAULT
TEMP
ILIM
PWR OK
FAULT
TEMP
ILIM
93040
4
2
1
3