Cisco XR 12410 - Manual (Page 176)

Chapter 5 Maintaining the Router
Powering Off the Router
5-4
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Step 2 Remove the (4) screws from each corner that fasten the partial front cover to the
air filter door (
Figure 5-2 ).
• Set aside the screws; you will need them to install the replacement front
cover.
Figure 5-2 Removing the Air Filter Door Front Cover
Step 3 Hold the replacement front cover by its outside edges and align the screw holes in
the front cover with the holes on the air filter door.
Step 4 Secure the front cover to the air filter door using the (4) screws that you removed
in Step 2.
Caution Do not overtighten the screws. Overtightening the screws can damage the
threaded holes in the air filter door.
Step 5 Close the air filter door and tighten the captive screws.
Caution Align and seat the door carefully to avoid damaging the EMI-preventive gaskets
on the door. The air filter door must be closed and secured at all times to maintain
correct EMI performance.
ALARM 2 SF C
-3/STM-POS
6DS3–SMB P
/ H / F
12DS3–SMB P
/ H / F
-48/STM-16-SCPOS OC-12/STM-4 A
T M
ST ETERNET E PR
OCESSOR