Cisco XR 12410 - Manual (Page 101)

3-19
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Chapter 3 Installing the Cisco XR 12410 Router
Rack-Mounting the Router Chassis
Step 2 Install the right rack-mount bracket ( Figure 3-13 ).
a. Align the bottom screw hole of the bracket with the marked screw hole at the
bottom of the rack and finger tighten a screw in that hole.
b. Finger-tighten a second screw in the top hole of the bracket.
c. Use a screwdriver to tighten both screws securely.
Step 3 Repeat Step 2 for the left rack-mount bracket.
Step 4 Use a level to verify that the tops of the two brackets are level, or use a measuring
tape to verify that both brackets are the same distance from the top of the rack
rails.
Figure 3-13 Installing the Left and Right Rack-Mount Brackets
53222