Scilogex D2012 Micro-Centrifuge - Manual (Page 18)

USER MANUAL
www.scilogex.com Page 18
11.2.3 Autoclaving PA ǃPC and PP tubes
PA begins softening at about 120ć, PC and PP at about 130ć. Autoclave PA tubes at 115ć˄0.7kg/cm2˅for 30
minutes, PC and PP tubes at 121ć˄0.1kg/cm2˅for 20 minutes. If a certain temperature is exceeded, the tubes may
be deformed.
When use a sterilizing chamber, please operate as follows:
 Place tubes in vertical position, mouths upward. If tubes are placed sideways, they may deform into an oval
shapedue to gravity.
2 Remove locking nut and lid to prevent from deformation or rupture.
3 Wait until the sterilizing chamber cools down to the room temperature before removing tubes.
11.2.4 Conditions and life expectancy of tubes
The life expectancy of plastic tubes depends on the characteristics of samples, speed of the rotor used, temperature
applied and so on. When the plastic tubes are used for ordinary aqueous samples (pH between 5 and 9), their life
expectancies are defined as follows.
Be operated at the maximum speed:
High quality tubes (PAǃPCǃPP): 30-50 operations
Ordinary tubes (PAǃPCǃPP): around 10 operations(Using in low speed can extend the tube life)
Life expectancy of tubes also depends on the pretreatment conditions such as cleaning and sterilization, lifetime can
be cut down.
Notice: Do not use damaged or cracked tubes.
12.Calculate RCF
13. Ordering Information
Relative Centrifuge Force (RCF) can be determined with the following calculation formula.
RCF = 1.118 × r × n2 × 10-5
R — rotating radius, unit: cm; n — rotating speed, unit: rpm
Cat. No. Model Descriptions
911015119999 D2012
High Speed Mini Micro-Centrifuge, with A12-2 rotor kits, US plug, 110V-
240V/50Hz/60Hz
911115119999 D2012
High Speed Mini Micro-Centrifuge, with A12-2 rotor kits, Cn plug, 110V-
240V/50Hz/60Hz
911215119999 D2012
High Speed Mini Micro-Centrifuge, with A12-2 rotor kits, Euro plug, 110V-
240V/50Hz/60Hz
911315119999 D2012
High Speed Mini Micro-Centrifuge, with A12-2 rotor kits, UK plug, 110V-
240V/50Hz/60Hz
Accessories
19400005 A12-2 Rotor kits with lid, fixing clips and O'ring, 15000rpm, 2ml*12, used with D2012
19500001 A02P2 0.2ml rotor adapter, used with A12-2 & AS24-2 rotors, 24pcs/pk
19500002 A05P2 0.5ml rotor adapter, used with A12-2 & AS24-2 rotors, 24pcs/pk